EDM Machinery

  • 1991 Charmilles Robofil 4020 Wire EDM 1991 Charmilles Robofil 4020 Wire EDM

    1991 Charmilles Robofil 4020 Wire EDM

    1991 Charmilles Robofil 4020 Wire EDM FEATURES INCLUDE: * Charmilles Control Unit * Automatic Wire Thread (AWT) * Submerged Machining * Complete Dielectric Filtration System * Programmable Power Z...

  • 1994 Sodick MM5 TX22 Sinker EDM 1994 Sodick MM5 TX22 Sinker EDM

    1994 Sodick MM5 TX22 Sinker EDM

    Sodick MoldMaker5 with Mk22 control Extreme Restoration Completed P r i s t i n e    C o n d i t i o n 80 amps continuous  Fire Extinguisher 3R Macro Automatic Chuck Oil Chiller Includes expert installation and training Turn Key EDM...

  • 1995 Mitsubishi CX20 wire EDM

    1995 Mitsubishi CX20 wire EDM

    1995 Mitshibishi CX20 wire EDM Table Travels: X-axis: 19.7" Y-axis: 13.7" Z-axis: 11.8" Workpiece Size: 41.3" x 31.5" 1764 Lbs AWT Submersible Cutting Chiller

  • 1996 Charmilles Robofil 4020SI Wire EDM

    1996 Charmilles Robofil 4020SI wire EDM FEATURES INCLUDE: * SI Cutting Technology * Automatic Wire Thread (AWT) * Submerged Machining * Complete Dielectric Filtration System * Programmable Power Z...

  • 1996 Sodick A530D Ex21 wire EDM 1996 Sodick A530D Ex21 wire EDM

    1996 Sodick A530D Ex21 wire EDM

    1996 Sodick A530D Ex21 wire EDM   X-axis travels: 19.7" Y-axis travels: 12.5" Z-axis travels: 10.6" Inside work tank dimensions: 38.5" x 28.7" Taper Angle: 10 degrees   Auto wire threading Submersed cutting Chiller Unit Dielectric...

  • 1996 Sodick MM3 NFII40 Sinker EDM 1996 Sodick MM3 NFII40 Sinker EDM

    1996 Sodick MM3 NFII40 Sinker EDM

    Sodick MoldMaker 3 with NF40 control P r i s t i n e    C o n d i t i on Menu Programming    No Flush Technology   4 Position Automatic Tool Changer   Fire Extinguisher   3R Macro Automatic...

  • 1997 Fanuc Alpha 1C wire EDM 1997 Fanuc Alpha 1C wire EDM

    1997 Fanuc Alpha 1C wire EDM

    1997 Fanuc Alpha 1C wire EDM   FEATURES INCLUDE: * Fanuc Series 16iW controls                                                ...

  • 1998 Charmilles Robofil 330F Wire EDM 1998 Charmilles Robofil 330F Wire EDM

    1998 Charmilles Robofil 330F Wire EDM

    1998 Charmilles Robofil 330F Wire EDM FEATURES INCLUDE: * Fanuc 16i controls * Automatic Wire Thread (AWT) * Submerged Machining * Complete Dielectric Filtration System * Programmable Power Z...

  • 1998 Mitsubishi SX10 wire EDM 1998 Mitsubishi SX10 wire EDM

    1998 Mitsubishi SX10 wire EDM

    1998 Mitshibishi SX10 Wire EDM Table travels: X-axis: 13.7" Y-axis: 9.8" Z-axis: 8.6" Maximum workpiece: 31.4" x 22.6" 1168 Lbs AWT Submersible Cutting Chiller Fine Finish Circut